Inline doorlopende anker voor enkele / dubbele draad tussenliggende trekmachine

Description
Our continuous annealing machine for intermediate drawing machine is ideal for annealing 0.6-2.76mm copper rods and brass rods. The inline continuous annealer is made up of the annealer, electric control system and cooling fluid circulation system.

Features
1. DC annealing and digital voltage control ensure uniform elongation after wire annealing.
2. Segmented annealing with separate sealed steam protection system and reliable drying and cooling system to ensure high-quality wire surface.
3. Characterized by high overall performance, this continuous annealing machine is especially suitable for continuous annealing of conductors.
4. Driven by imported high-quality flat belt, this inline continuous annealer enjoys stable performance and low noise.
5. Compact design for fast installation and space-saving, and upgraded design on the basis of advanced equipment.
6. This continuous annealing machine enjoys maximum wire drawing speed of 1800m/min.
7. Sufficient supply of spare parts and responsive technical support.
8. Anti-corrosion design of the annealing container reduces costs of maintenance and replacement.
9. Models of single wire and double wire, horizontal and vertical types are available.

Technische specificaties (horizontaal ontwerp)

Item TH3000 Draaddiameter Max. mechanische snelheid Buitendiameter van sterven Max. uitgloeiende stroom Max. gloeispanning Gloeierig vermogen Stoomgeneratorvermogen Stoom Totale afmeting (L × B × H) Netto gewicht Gloei snelheid (m / min)

bestek
	STH3000
0,6 ~ 2,78 mm	0.6 ~ 1.6 mm × 2 draden
1800m / min	1800m / min
25mm	25mm
DC 3000A	DC 3000A
DC 60V	DC 60V
230kVA	230kVA
9kW	9kW
13kg / h	13kg / h
3050 × 1800 × 2200 mm	3050 × 1900 × 2200 mm
3200kg	3500kg

Gegloeid draadformaat TH3000 Materiaal 0.6mm 0.9mm 1.2mm 1.6mm 2.0mm 2.6mm

Snelheid (m / min)	Verlenging na uitgloeien
	STH3000
Koper
1500	1400 × 2 draden	18 ~ 30%
1300	1200 × 2 draden	18 ~ 30%
1200	1000 × 2 draden	25 ~ 33%
900	700 × 2 draden	28 ~ 33%
600	/	28 ~ 33%
400	/	28 ~ 33%

Technische specificaties (verticaal ontwerp)
Item TH1000 Draaddiameter (mm) Max. mechanische snelheid (m / min) Buitendiameter van sterven (mm) Max. gloeistroom (A) Max. gloeispanning (V) Gloeierkracht (kVA) Stoomgeneratorvermogen (kW) Stoom (kg / uur) Totale afmeting (L × B × H) (mm) Netto gewicht / kg) Productiesnelheid

bestek
	TH2000	TH2000A
0.4 ~ 1.2	0.4 ~ 1.6	0.4 ~ 2.0
2000	2000	2000
Φ25	Φ25	Φ25
1000	2000	2200
60	60	60
84	173	195
6	6	9
12	12	12
1350 × 1600 × 2640	1350 × 1600 × 2640	1350 × 1600 × 2840
1880	1880	2000

Gegloeid draadformaat TH1000 0.4mm 0.8mm 1.0mm 1.2mm 1.6mm 2.0mm

Snelheid (m / min)	Verlenging na uitgloeien
	TH2000	TH2000A
1600	1600	1600	18 ~ 30%
1500	1500	1500	18 ~ 30%
1000	1200	1300	25 ~ 30%
800	1100	1100	25 ~ 33%
......	700	800	28 ~ 33%
......	......	400	28 ~ 33%

Werkvereisten

1. Ensure that the workshop has enough space, with minimum height of 4-5 meters.
2. Convenient raw material supply nearby.
3. Qualified staff is kept for the installation, operation and maintenance of this high speed rod breakdown machine.
4. Well-sealed annealing liquid circulating pipeline.
5. This continuous annealing machine requires stable and sufficient water, power and compressed air supply.
6. Our inline continuous annealer works together with 5-ton (at least) crane, vapor generator, air compressor, wire threader, wire drawing dies, wire drawing lubricant, gear oil and heat exchanger.

Note
1. Please refer to your own requirements on production capacity when choosing the machine.
2. This continuous annealing machine is not suitable for annealing aluminum and aluminum alloy rods, as well as carbon steel and stainless steel rods.
3. Please carry out daily check and maintenance according to requirements.

Case
In March 2015, inline continuous annealer for double wire intermediate drawing machine was installed at MEGA Cable Company, Malaysia.