Description
This high speed fine wire drawing machine is suitable for drawing Φ1.8mm copper wires, tinned copper wires, silver-plated copper wires into fine wires. Our multiple fine wire drawing machine consists of wire pay-offs, wire drawing machine and electric control system.
Features
1. Compact structure and upgraded design on the basis of advanced equipment.
2. This high speed fine wire drawing machine enjoys maximum wire drawing speed of 1800m/min.
3. User-friendly interface design with digital display of lubricating oil temperature and graphic display of failure point.
4. Sufficient supply of spare parts and responsive technical support.
5. Quick die change, saving time for stopping the machine and changing dies.
6. The multiple fine wire drawing machine is designed with wire drawing system that features low cost and high production efficiency.
7. Precise gear transmission allows stable performance and low noise.
8. Carefully-designed wire drawing scheme and optimized cooling liquid supply allow smooth finishes.
9. Reduced consumption of power, lubricating oil and wire drawing lubrication liquid.
10. Models of 8 / 14 / 16 wires are available.
Specifications
Item
|
Specifications
|
Model
|
DXL21-8
|
DXL21-14
|
DXL21-16
|
Max. mechanical speed (m/min)
|
1800
|
1800
|
1800
|
Max. number of wires for drawing
|
8
|
14
|
16
|
Max. number of dies per wire
|
21
|
21
|
21
|
Max. inlet dia. (mm)
|
1.8
|
1.8
|
1.8
|
Finished wire dia.(mm)
|
0.15 ~ 0.4
|
0.15 ~ 0.4
|
0.15 ~ 0.4
|
Drawing capstan dia. (mm)
|
100
|
100
|
100
|
Haul-off capstan dia. (mm)
|
100
|
100
|
100
|
Diameter of die (mm)
|
Φ25 × 12
|
Φ25 × 12
|
Φ25 × 12
|
Mechanical elongation
|
6 ~ 21.6%
|
6 ~ 21.6%
|
6 ~ 21.6%
|
Main motor power (KW)
|
90
|
110
|
160
|
Capstan motor power (KW)
|
30
|
30
|
45
|
Overall size (L × W × H) (mm)
|
1700 × 1200 × 2200
|
2100 × 1400 × 2200
|
2200 × 1400 × 2200
|
Net weight (kg)
|
3500
|
3700
|
4000
|
Production Speed (m/min)
|
Specification
|
Speed
|
Die Elongation
|
|
Non-annealed wire
|
Annealed wire
|
|
0.15mm
|
1600
|
1300
|
20 ~ 28%
|
|
0.3mm
|
1200
|
1200
|
22 ~ 30%
|
|
0.4mm
|
700
|
700
|
25 ~ 30%
|
Working Requirements
1. Ensure that the workshop has enough space, with minimum height of 4-5 meters.
2. Convenient raw material supply nearby.
3. Qualified staff is kept for the installation, operation and maintenance of this high speed rod breakdown machine.
4. Concentrated drawing fluid circulating pool and well-sealed piping system.
5. This high speed fine wire drawing machine requires stable and sufficient water, power and compressed air supply.
6. Our multiple fine wire drawing machine works together with 15-ton (at least) crane, vapor generator, air compressor, wire threader, wire drawing dies, wire drawing lubricant, gear oil and heat exchanger.
Note
1. Please refer to your own requirements on production capacity when choosing the machine.
2. This multiwire drawing machine is not suitable for wire drawing of carbon steel or stainless steel rods.
3. Please carry out daily maintenance according to requirements.
Case
In March 2016, copper multiple fine wire drawing production line installed at ONO from Osaka, Japan.
