Description
This high speed intermediate drawing machine is suitable for drawing Φ3.0mm copper and copper alloy rods, and Φ4.2mm aluminum and aluminum alloy rods into wires. Our intermediate wire drawing machine consists of wire pay-offs, wire drawing machine and electric control system.
Features
1. Full immersion design of drawing cones allows best cooling and lubricating effect of wires.
2. Highly-efficient and energy-saving design helps reduce power consumption of wire drawing.
3. Precise gear transmission to guarantee extremely smooth operation and even load transmission.
4. Steel welding body for longer service life.
5. Driven by gearbox, this high speed intermediate drawing machine enjoys stable performance, low noise and reduced maintenance.
6. Compact structure and upgraded design on the basis of advanced equipment.
7. This intermediate wire drawing machine enjoys maximum wire drawing speed of 2000m/min.
8. Sufficient supply of spare parts and responsive technical support.
9. Single / double wire intermediate drawing machine is available.
Specifications
Item
|
Specification
|
Model
|
2 wires
|
Model
|
DZL250B-17
|
Material
|
Copper, aluminum alloy
|
Max. inlet dia. (mm)
|
Copper: 3.0 × 2 wires
Aluminum alloy: 4.2 × 2 wires
|
Max. drawing dies per wire
|
17 × 2 wires
|
Outlet range (mm)
|
0.4 ~ 2.0 × 2 wires
|
Max. mechanical speed (m/min)
|
Max 2000
|
Outside diameter of die (mm)
|
Φ25/32
|
Mechanical elongation (%)
|
18.18/13.2
|
Drawing cone diameter (mm)
|
Max. 250
|
Capstan diameter (mm)
|
Φ250 × 2
|
Main motor power (kW)
|
AC75
|
Overall size (L × W × H) (mm)
|
2400 × 1160 × 1400
|
Net weight (kg)
|
3560
|
Production Speed (m/min)
Non-annealed wire size
|
Speed (m/min)
|
DZL250B-17
|
0.4mm
|
0.4 × 2-1800
|
0.6mm
|
0.6 × 2-1600
|
0.8mm
|
0.8 × 2-1200
|
1.0mm
|
1.0 × 2-1000
|
2.0mm
|
2.0 × 2-500
|
Working Requirements
1. Ensure that the workshop has enough space, with minimum height of 4-5 meters.
2. Convenient raw material supply nearby.
3. Qualified staff is kept for the installation, operation and maintenance of this high speed rod breakdown machine.
4. Concentrated drawing fluid circulating pool and well-sealed piping system.
5. This intermediate wire drawing machine requires stable and sufficient water, power and compressed air supply.
6. Our high speed intermediate drawing machine works together with 10-ton (at least) crane, vapor generator, air compressor, wire threader, wire drawing dies, wire drawing lubricant, gear oil and heat exchanger.
Note
1. Please refer to your own requirements on production capacity when choosing the machine.
2. This high speed intermediate drawing machine is not suitable for wire drawing of carbon steel or stainless steel rods.
3. Please carry out daily maintenance according to requirements.
Case
In March 2015, copper double wire intermediate drawing machine was installed at MEGA Cable Company, Malaysia.
